ISUZU 700P dump truck, ISUZU 4×2 medium duty chassis, ISUZU 190HP diesel engine, MLD 6-speed transmission, the cargo body volume is 5CBM, and payload is up to 5 tons.
Dump truck refers to the vehicle that lifts the goods by itself through hydraulic or mechanical lifting. Also known as dump truck. It is composed of automobile chassis, hydraulic lifting mechanism, cargo compartment and force taking device. The dump truck is divided into two kinds of backward tilting and side tilting, and the piston rod movement is controlled by the control system. The backward tilting is more common, and the piston rod is pushed to tilting the car, and a few two-way tilting.
Working principle
The structure of the engine, chassis and cab of the dump truck is the same as that of the general truck.
The high-pressure oil enters the lifting hydraulic cylinder through the distribution valve and the oil pipe, and the cab safety protection plate is provided at the front of the carriage.
The engine drives the hydraulic pump through the transmission and the force taking device, and the hydraulic tipping mechanism of the carriage is composed of the oil tank, the hydraulic pump, the distributing valve, the lifting hydraulic cylinder, the control valve and the tubing.
The engine drives the hydraulic pump through the transmission and the force taking device, and the high-pressure oil enters the lifting hydraulic cylinder through the distribution valve and the tubing, and pushes the piston rod to make the carriage tip over. Backward tilting is more common, and the movement of the piston rod can be controlled by a control system to stop the carriage in any desired tilting position. The carriage uses its own gravity and hydraulic control to reset.
| Truck parameters |
||||
| Chassis model |
QL1090 |
Cargo box size |
5050x2150x450mm |
|
| Overall dimensions |
7050x2307x2550mm |
Wheel base |
3815 mm |
|
| Front/rear wheel track |
1680/1650mm |
Front/rear suspension |
1110/2602mm |
|
| Approach/departure angle |
21/10° |
Maximum speed |
110km/h |
|
| Chassis Manufacturer |
QingLing Motors (Group) Co., Ltd. |
|||
| Cab |
Configuration |
700P, single cabin, allowable 3 passengers, air conditioner, USB radio interface, cab can be flipped. |
||
| Color |
White |
|||
| Engine |
Model |
4HK1 |
||
| Emission |
Euro 5 |
|||
| Rated power |
190hp |
|||
| Displacement |
5193ml |
|||
| Manufacturer |
Isuzu Engine (Chongqing) Co., Ltd. |
|||
| Tire |
Size |
8.25-16 |
||
| Number |
6+1 nos |
|||
| Brake |
oil brake |
|||
| Frame |
216X60(6+3)mm |
|||
| Front axle |
4.0 tons |
|||
| Rear axle |
7.0 tons |
|||
| Drive form |
4X2 |
|||
| Suspension |
Multi leaf springs |
|||
| Rated voltage |
24V,DC |
|||
| Transmissions |
Isuzu MLD six speed transmission, 6 speed forward 1 reverse. |
|||
| Steering device |
Power assisted steering |
|||
| Steering wheel |
Left hand drive |
|||
Shirely
Shirely